Electro-Hydraulic Rotary Valve Actuator
Compact. Simple. Versatile. Delivering up to 300,000 in-lbs of torque with an energy efficient motor design.
The E2HR Series is an all-in-one design. No need for separate hydraulic power units and hoses.
The E2HR packs high performance into the smallest possible installation envelope for ¼ turn valve actuating applications. All hydraulic components and sensors are integrated into a single compact manifold block that also houses the actuator and integral oil reservoir.
The control panel can be mounted directly to the manifold block or installed remotely to run multiple units from a single control panel This self-contained actuator can be installed either vertically or horizontally and has no external piping.
Specifications At a Glance
Torque up to 300,000 in-lb
Hydraulic Manual Override
-50C to +40C Operating Temp.
SIL-3 Capable (pending)
Rotation: 90° +/- 5°
Roll Over the icons to learn more
All in one design. No need for separate hydraulic power units and hoses.
Easy To Use Display
The large, easy to use touch screen display makes it easy for quick setup and operation. The software provides logging of real-time valve performance analysis.
Rotary Valve Actuator
The rotary valve actuator offers up to 300,000 in-lbs of Torque.
The E2HR provides Fail Last, Fail Close, and Fail Open modes. It also has the ability to be mounted in horizontal and vertical positions.
Very Low Power Consumption
100% Duty Cycle
Power on Demand - Lock in Place
Fail Last Lock, Fail Close, or Fail Open
On/Off Modulating Service
The Panel Design
Main Panel: The E2HR control panel comes standard with touch screen* for quick setup and easy operation. The panel can be mounted remotely or on your E2HR.
In addition, you can operate your E2HR locally using the physical buttons on the front of the panel.
Status Screen: The E2HR status screen gives you a quick overview of your system status. Available from the touch screen* or via Wi-Fi.
Remote Screen: Operate your E2HR remotely using one of the communication protocols below.
Electro-Hydraulic Rotary Actuator Design
Compact: All in one design. No need for a separate hydraulic power unit and hoses.
Simple: Easy to use touch screen for quick setup and operation.
Data Logging: System records position and time data for valve performance analysis.
Partial Stroke Test: Initiate PST from touch screen or remotely.
Versatile: Can be mounted in horizontal valve stem applications.
Remote Diagnostics and Trouble-Shooting by Cowan*
(*direct VPN connection required)
240V Single Phase
115V Single Phase
575V 3 Phase
460V 3 Phase
CSA approved Cl 1, Div
2, grps A, B, C, & D (OPT)
CSA approved Cl 1, Div 1,
grps C, & D (OPT) /ATEX, II
3G EEx nA II T3 -40°C ≤ Ta
≤ 65°C / ATEX,
II 2G EEx ‘d’ iiB, T3 -40°C ≤
Tamb ≤ 65°C